Enduro Bearings Abec 3 LLB

Enduro ABEC 3 bearings represent the majority of bearings on the market, ABEC 0 or ABEC 1, one or two levels lower. The balls are Grade 5 and the seals one on each side (2RS) are double lipped (LLB or LLU). These bearings are lubricated with a high Teflon grease (Rheolube 7703 grease).

ABEC 3 Enduro Bearing has several levels of sealing

• “2RS” has 2 rubber seals on each side for the highest protection available.
• “LLB” is a double-lip, low-contact labyrinth seal bearing.
• “LLU” is a medium contact double lip seal labyrinth groove bearing.
• “MAX” is a bearing that does not have a retainer cage, but a specific filling slot for the connecting rods allowing a 35% higher load resistance, so they are particularly recommended for rear suspension pivots, bottom brackets or anywhere else where a standard bearing wears out prematurely.

Reference / Application

• 699LLB : 9 x 20 x 6 (7.1g)
• 6003LLB: 17 x 35 x 10 (39.6 g)
• MR18307LLB: 18 x 30 x 7 (15.1 g)
• MR22378LLB-E : 22 x 37 x 8/11,5 (32.8 g) / For SRAM Crank, Non-Drive side
• MR24371LLB : 24 x 37,1 x 7 (31.1 g) / For some Trek Carbon Frames

MORE INFORMATION